Copyright©Zhejiang Scientific Instruments & Material I/E Co., Ltd.

BRAND

APPLICATION INDUSTRY

Products

产品名称

Sample Concentrator

SampleConcentrator   ProductIntroduction SampleConcentratorNM-12/24aremainlyusedinbatches,suchasdrugscreening,hormoneanalysis,liquid/gasphase,aswellasmassspectrumanalysis.Operationprinciple:Heatingasa
ID
NM-12/ NM-24
Affiliate classification
Quantity
-
+
没有此类产品
Detail
Product parameters

Sample Concentrator 

 

 

Product Introduction

 

Sample Concentrator NM-12/24 are mainly used in batches, such as drug screening, hormone analysis, liquid/gas phase, as well as mass spectrum analysis. Operation principle: Heating a sample by blowing nitrogen to the its surface to get rapid evaporation, solvent separation, to achieve the purpose of keeping concentrated anaerobic samples and its high purity. Concentrating by Sample Concentrator to instead of Rotary evaporator can deal with dozens of samples at the same time and shorten the preparation time. It is a time-saving, easy operation and fast system.

 

Product Characteristics

 

1. The heater sample is efficiently heated to the evaporation temperature, while the gas from the gas chamber blowing to the surface of the solution through gas blowing needle, to promote the evaporation and concentration of sample solution efficiently.

2. 12/24 airway control switch with no gas wasting

3. The system is composed of an adjustable air chamber and a heater

4. The position of the air needle in the air chamber can be changed for different test tubes. The standard gas needle length is 150mm

5. Gas chamber height adjustable to the solvent’s liquid level height, and the whole system can be placed in a fume hood when the toxic solvent is concentrated

6. Automatic fault detection and alarm function

7. Standard air chamber and special adjustable sample holder

8. Built-in over temperature protection device

9. Instant temperature display, Time lapse display

 

 

Technical Specifications

 

Model

NM-12

NM-24

Temperature Control Range

RT+5℃~150℃

Heating Time

≤30min (40℃ up to 50℃)

Temp. Control Accuracy@40~100℃

±0.5℃

Temp. Control Accuracy

@100~150℃

±1℃

Temp.Stability@100℃

±0.5℃

Standard Blocks

1 PCS

2 PCS

Needle Length

150mm

Display Accuracy

0.1

Timer

1min~99h59min

Display

LCD (5 Groups of Controlled Procedure)

Nitrogen Consumption

0~10L/min

Nitrogen Pressure

≤0.1MPa

Max Power

400W

600W

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Key words